Oct 12, 2017

Eve — Reset accessories if readings are incorrect



 
Battery Powered Eve Accessory Soft Reset


If the readings of your battery-powered Eve accessory are incorrect, then the first thing to try would be to remove the batteries for 15 seconds, and then place them back in the accessory.  This soft reset may immediately get things working as expected.

 
Battery Powered Eve Accessory Hard Reset


If this doesn't help, then you can use the reset instructions that came with the Quick Start Guide of your Eve accessory:

Please Note: After a Hard Reset, you will need to re-enter your HomeKit code

Please Note: A reset will delete all measurement data from the accessory.

Eve Degree -
 
1) Press the "Reset" button on the back of the enclosure for more than 10 seconds until the LCD shows "-99.9"
2) Release the Reset button immediately 
3) Eve Degree should now be reset.
 
Eve Door & Window - There is a reset button inside the battery door.  Use a paper clip or similar object to press it until the red LED is blinking.

Eve Motion - There is a reset button inside the battery door.  Use a paper clip or similar object to press it for 10 seconds, until the red LED is blinking 5 times.

Eve Room - There is a reset button inside the battery door.  Use a paper clip or similar object to press it until the red LED is blinking.

Eve Thermo - Make sure that known good batteries are inserted, and Eve Thermo is powered up.  There is a reset button on the side of the unit, underneath the battery door. 

 

 
Use a paper clip or similar object to press the reset button until the red LED is blinking.

Eve Weather - There is a reset button inside the battery door.  Use a paper clip or similar object to press it until the red LED is blinking.

 
Eve Energy Reset


If the readings of Eve Energy are incorrect, then the first thing to try would be to unplug it from the wall, and then plug it in again.  This soft reset may immediately get things working as expected.

If this doesn't help, then you can use the reset instructions that came with the Quick Start Guide:

Eve Energy - Plug in Eve Energy into the power outlet. There is a button on the accessory. Press it until the red LED is blinking.

 
Eve Light Switch Reset


You can reset Eve Light Switch by holding the button for a few seconds.

The light in the center of the Eve Light Switch will turn yellow during the reset process.